The Juniper EX3200 24P Layer 3 Switch# is truly an Ethernet fixed-configuration switch system created for today’s widely networked corporations. The EX3200 features complete Layer 2 and Layer 3 functions which facilitate hardware-based packet forwarding and high overall performance packet switching and low latency.

Today’s high performance firms require high capacity, and high-speed multi-port Ethernet switches with higher availability across timezones. Should a company is doing your research for the separate solution in access-layer expansions in off-site workstations and campus networks, here’s a stand alone field functional solution to take into consideration.

The Juniper EX3200 24P Layer 3 Switch comes equipped with four platform configurations and is a 24 port box with 10/100/1000 Mbit/s Ethernet ports that support either full or partial Power over Ethernet (PoE). The base 24 and 48-port EX3200 switches provide the full support to networked appliances like telephones, video cam and wireless LAN – WLAN – accessibility points. Full PoE inside of the switch will also support high-density IP telephony like VoIP. Control of Ethernet is a Ethernet cabling system which allows both data and electric power to move safely using one cable. This Ethernet cabling procedure demands the use of category 5 cable or higher or Category 3 cable that could function with reduced power level. Updated PoE standard features from 25.5 W to 51 W of power.

The Juniper EX3200 24P Layer 3 Switch# has additional 4-port GbE and 2-port 10GbE uplink modules with pluggable optics for high-speed connectivity to many other switches or upstream units. This means high data throughput capabilities yet low capital visibility for virtual workgroup deployments.

The JUNOS computer system helps ensure continuous and stable control plane function execution due to the simplified single release train. The layer 3 switching handles high-performance LAN traffic smoothly. With its advanced packet forwarding effectiveness, a Layer 3 switch device can certainly be a cost-effective option to routers. Truly the only distinction between a Layer 3 switch along with the router will be the physical management by network owner through LCD panel.

Routers traditionally operate on microprocessor to transfer packets of web data. Fixed configuration switches cost less than modular switches with an identical variety of ports. The drawback to the fixed settings switches is they provide no configuration mobility as the various ports are predetermined and cannot be converted. Some FCS, however, are stackable. Interconnecting several switches enhance port functionality, though the most of switches which can be loaded is dictated by your manufacturing company.

For power supply serviceability, Juniper EX3200 24P Layer 3 Switch is field replaceable and fan tray lowers MTTR. The EX3200 switch is a maintained foundation that works with several different features, promotes high accessibility and network access control (NAC). NAC or Unified Access Control in Juniper, enables the switch to rely on accessibility coverages than firewalls, VPN gateways manufactured by various companies.

Juniper EX3200 24P Layer 3 Switch Ethernet switch is compliant with Internet Protocol (IP) telephony technology from Avaya. The Juniper EX3200 24P Layer 3 Switch# are probably the five families of Juniper EX series# switches which are also interoperable with some other networking operations platforms from AlterPoint, EMC, CA, HP, InfoVista, IBM and SolarWinds.